Sonifex AVN-TB6, Руководство пользователя

Страница: 29 / 64

19
Network Address Announcement 11
11. Network Address Announcement
These units have a network address announcement mode which can be
used to determine the current settings for either of the 2 network ports:
1. Ensure that volume control mode is not currently active i.e. the LEDs
around the rotary encoder control are showing the microphone signal
level. Also, ensure no calls or pages are active.
2. Press the rotary encoder control button 6 times within 2 seconds. If the
button is not pressed 6 times within a 2 second period starting from the
first press, the network address announcement mode will not start.
3. Once the network address announcement mode has been initiated, the
rotary encoder control and channel buttons 1, 2, 4 and 5 will flash red.
4. Press channel 1 for the Ethernet port IP address, channel 2 for the
Ethernet port sub-net mask, channel 4 for the AoIP port IP address and
channel 5 for the AoIP port sub-net mask. Once a selection has been
made, the chosen details will be announced through the loudspeaker or
the headphones. If no selection is made within 3 seconds, the network
address announcement mode will be cancelled, and the rotary encoder
control and channel buttons will return to the non-illuminated state.
5. Once the chosen details have been announced, the unit return to normal
operating mode.