Sonifex AVN-TB6, Руководство пользователя

Страница: 16 / 64

6
3 Front Panel Controls, Connections & Indicators
Status Indicators
The RGB status indicators are located on the left side of the front panel.
AoIP
Indicates the status of AoIP services on the network as follows:
Green All transmit AoIP streams are available and at least one
external AoIP service is available.
Amber Either the transmit AoIP stream has not started or there
are no external AoIP services available.
Off The transmit AoIP stream has not started and there are
no external AoIP services available. The indicator will
also be off if there is no link on the AoIP network port
(lower network connector).
The AoIP network interface is configured via the embedded web server. See
the Network web page on page 25.
Ethernet
Indicates the link status of the Ethernet network port (upper network
connector) as follows:
Green The link is up.
Off The link is down.
The Ethernet network interface is configured via the embedded web server.
See the Network web page on page 25.
Talk
Illuminates green if an intercom call or page is active.
AGC
Indicates the status of the automatic gain control as follows:
Green The AGC is enabled.
Red The audio source level for one of the outputs is too high
and is being limited. The monitored outputs are the
headphone/headset output and the speaker output.
Clock
Indicates the status of PTP clock as follows:
Green The unit is a PTP slave with a clock offset of less or
equal to ±1µs or the unit is the PTP master.
Amber The unit is a PTP slave with a clock offset of between
±1µs and ±10µs.
Flash Amber The unit is in a listening state and is not yet acting as the
master or a slave.
Red The unit is a PTP slave with a clock offset of greater
than ±10µs.
Flash Red The unit is a PTP slave and no master is available.
AC PSU
Indicates the status of the internal AC-DC power supply as follows:
Green AC-DC generated voltage is within normal operating range
of +11V to +13V. This is the normal condition.
Amber AC-DC generated voltage is less than +11V or greater than
+13V. This indicates a warn condition.
Red AC-DC generated voltage is less than +10V or greater than
+14V. This indicates a fault condition.
DC PSU
Indicates the status of the DC power input as follows: