Sonifex AVN-TB6, Руководство пользователя

Страница: 40 / 64

30
12 Embedded Web Server
Channels - Basic Settings Defaults
Channels 1 – 6:
AoIP Source: not set
Channels - Advanced Settings Web Page
The Advanced Settings page is located under the Channels sub tab. It
shows the current assignments for each of the 6 channel buttons on the
front panel. Other options that control intercom calls are also set here.
Fig 12-11: Channels - Advanced Settings Web Page
Channel Select – This drop down list selects the channel to view and change
settings.
AoIP Source – This setting assigns the intercom name or AoIP stream
name to connect to when the intercom channel is active. If the source is
an intercom device, this name corresponds to the intercom name that is
assigned on the network web page. This name can be entered manually, or
it can be selected from the dynamic list of available AoIP sources detailed
below.
Available AoIP Sources – This dynamic drop down list shows the 3 types
of AoIP sources that are currently visible on the network and available for
selection as a target for a channel. These types are AVN Intercom Devices,
AVN Intercom Devices with IFB and AoIP Streams. Selecting an AoIP source
from this list places the name into the AoIP source edit box.
IFB Mode – This option allows the selected channel to be assigned to
an IFB AoIP stream from a remote intercom device. This stream type
will have a designated audio feed that will be replaced by or mixed with
the microphone audio when the channel is active. If IFB mode for the
channel is enabled and the AoIP source is an available intercom device,
but the configured IFB stream does not exists, a non IFB mode call will be
connected instead.
IFB Source – This is the AoIP stream name prefix of the IFB stream on the
selected AoIP Source. This name can be entered manually, or it can be
selected from the dynamic list of available IFB sources detailed below. This
option is only available if IFB mode is enabled.
Available IFB Sources – This dynamic drop down list shows the names of
the available IFB streams on the selected AoIP source. If the selected AoIP
source is not an IFB enabled intercom device, this list will be empty. This
option is only available if IFB mode is enabled.