SoniClear Video Recording Operation Guide
Pg 16
9.
Make sure the Subnet mask is set to 255.255.255.0 and click OK.
10.
Make sure the “Default gateway” field is blank (since there is no gateway used in
this connection).
11.
Make sure the DNS fields are also blank.
12.
Click OK to close the Local Area Connection Properties dialog. This may display
a diagnostic error dialog because this setting does not support connection to the
Internet. Dismiss these dialogs.
13.
Disconnect any Ethernet cable if it is not connected to the Axis camera.
14.
Reboot the computer.
15.
The computer will reset the Ethernet port to the new static address set in the
Alternate Configuration dialog when you connect to the camera.
