SoniClear Video Recording Operation Guide
Pg 12
d.
Plug the audio feed from the microphone or sound system into the
microphone input jack on the back of the camera. The kit of parts to make
this connection will vary, depending on the sound system. Contact
SoniClear for assistance with this connection.
5.
For kits that do include a Q7401 encoder:
a.
Plug the camera and encoder into the Netgear switch. Note that the camera
and encoder can be located anywhere, they do not need to be next to each
other or the computer.
b.
Plug the Netgear switch into the computer.
c.
Plug the audio feed from the microphone or sound system into the
microphone input jack on the Q7401.
d.
Note: For systems using the Netgear switch (or equivalent).
6.
Run SoniClear and record as directed in the SoniClear Users Guide.
7.
Loosen the focus and zoom adjustments on the camera. View the SoniClear
Liveview video preview window while adjusting the focus and zoom to the
appropriate coverage of the room. After adjustment is complete, tighten the focus
and zoom adjustments to prevent shifting.
8.
After general adjustments have been made on the camera lens, it may be
necessary to perform additional fine focus adjustment using the computer focus
assist feature. Connect to the camera using a web browser (entering the user name
and password for the camera). In the Settings section, select video settings and
focus, following the steps outlined on that display.
Using the V59 Video Camera Kit
The Video Recording Kit with the Axis V59 Camera is supplied ready to use. Once the
SoniClear software has been installed and the computer has been configured for video,
you can start recording using these setup steps:
1.
Set up the computer and microphones as required for the recording.
2.
Set up the Axis camera on a user-supplied tripod.
3.
Plug the 25’ Ethernet cable into the Axis camera.
4.
Plug the other end of the 25’ Ethernet cable into the Ethernet jack in the laptop or
desktop computer.
