SoniClear Video Recording Operation Guide
Pg 14
connecting directly to the camera as described in this section, using the adapter is
necessary for reliable operation.
8.
Plug the audio feed from the microphone or sound system into the microphone
input jack on the F44 camera base unit.
9.
Run SoniClear and record as directed in the SoniClear Users Guide.
10.
Using a screw driver, loosen the focus and zoom adjustments on the camera.
View the SoniClear Liveview video preview window while adjusting the focus
and zoom to the appropriate coverage of the room. After adjustment is complete,
tighten the focus and zoom adjustment screws to prevent shifting.
Using the Video Encoder Kit
The Video Recording Kit with the Axis Q7401 Encoder is supplied ready to use. Once
the SoniClear software has been installed and the computer has been configured for
video, you can start recording using these setup steps:
1.
Set up the computer and microphones as required for the recording.
2.
Connect the Axis Q7401 encoder to the composite video output of the existing
camera or video switching unit.
3.
Connect the Axis encoder to the supplied Axis T9120 Power Injector. Be sure to
use the jack labeled “Data & Power Out”.
4.
Plug the 6’ Ethernet cable into the jack labeled “Data In” and plug the other end
of the cable into the Ethernet Crossover Adapter.
5.
Plug the Ethernet Crossover Adapter into the Ethernet jack in the laptop or
desktop computer.
6.
Alternatively, connect the Q7401 directly to the computer and power it using the
included encoder power supply.
7.
Run SoniClear and record as directed in the SoniClear Users Guide.
Please note that some computers will connect to the camera without the need for the
Ethernet Crossover Adapter. However, in testing we have found the camera may not
always connect to the computer without the adapter. If you are connecting directly to the
camera as described in this section, using the adapter is necessary for reliable operation.
If you are connecting the encoder and computer into an Ethernet switch, no Ethernet
Crossover Adapter is required.
