sonible d24, Руководство пользователя

Страница: 35 / 50

35
d:24 owner‘s manual
6.1 Establishing a connection
If the amp has a valid network connection, it is possible to control it
via a remote control web interface.
The interface can be accessed from any device connected to the
same network, by typing the IP address of the amp (as listed on the
network screen) into the address bar of a web browser.
( NOTE : The browser has to support HTML5, e.g. Internet Explorer
10, Firefox 4, Safari 5.1)
6.3 Remote control of two ore more d:24
If you want to remotely control more than one d:24, you simply
have to open multiple tabs in your browser and enter the respec-
tive IP addresses of all amps. Please note, that each amp needs a
unique IP address (this is ensured in DHCP mode).
Meter window
The meter window continuously displays the levels of all
amplification channels (in sync with the control surface of
the amp).
1
2
3
4
Content window
The tabs audio and tools are only available when using one
of the digital input options (MADI or DANTE®).
Operation modes
This window provides easy access to the three functions:
global mute , stealth mode and silent mode.
System information
This window corresponds to the system screen of the
touch control interface (see chapter 5.2 „system screen“).
6.2 Connection problems
If no connection to the amp is available, an overlay will appear
showing that the remote control is waiting for a valid connection.