
27
AeroVee 2.1
Rev Z. 01/14/2015
Sonex Aircraft
LLC
© 2014 All Rights Reserved
Tools Required:
__ High Temperature RTV Silicone Gasket Maker
__ VW Oil Seal Installation Tool (optional, recommended)
__ Rubber Mallet
Parts Required:
__ End Shims, ACV-P02-19
__ Oil Seal, ACV-P01-68
OIL SEAL INSTALLATION
Assembly Instructions
Note: The correct number and
thickness of end shims was
determined in Crank Case
Assembly, page 17.
__1. Clean the oil seal bore
of excessive sealant,
particularly around
near the case parting
lines.
__2. Install the end shims
over the flywheel end
of the crank.
__3. Apply a light coat of
High Temperature RTV
Silicone Gasket Maker
to the outside diam-
eter of the oil seal and
install the seal. A VW
seal installation tool
may be used for best
results, however the
seal can also be lightly
tapped in place if care
is used.
__4. Wipe off any excess
sealant.