15
20. Before drilling holes or inserting screws into your vehicle’s body make sure you do not damage tubes or electric wires on the other side of the cover.
21. Do not connect to any electric systems of your vehicle that operate steering, brakes, or any other safety function. Doing so can result in loss of control over the vehicle, and can cause fire.
22. Do not install the player or its accessories in a location where they can prevent you from controlling the vehicle safely, e.g., between the steering wheel and the gear shift.
23. Make sure that wires do not coil around neighboring objects. Arrange cables and wires in a way that does not hinder you in driving. Wires that interfere with your movement or hang over the gear shift, the brake
etc. can be extremely dangerous. (E.g., the connection cable of a media player connected to the USB port.)
24. In case of any malfunction, turn of the player immediately, and consult your distributor. Many malfunctions are very easy to spot (e.g., no sound, bad smell, smoke, an external object inside the product etc.).
25. Make sure that no external objects get into the USB socket or the memory card slot, as these can cause fatal damage.
26. Protect it from dust, damp, liquids, heat, moisture, frost and impact, as well as direct heat or sunlight!
27. When leading the connection cables make sure that their insulation does not get damaged by any sharp metal objects nearby.
28. Do not connect any cables when the device is working. Never turn on the system with the volume at the maximum level. The pop or other noise spike which can be heard when switching on can cause irreparable
damage to the speakers immediately.
29. The warranty is not applicable to damage caused by irresponsible or improper installation or use.
30. Keep the remote controller battery out of the reach of children as it can cause death if swallowed.
PReCaUtIONS
CLeaNING
Use a soft, dry cloth and a brush for regular cleaning. To remove stronger stains, wet the cloth slightly with water. Avoid scratching the display’s surface; never wipe the display when it is dry, and do not use a coarse
cloth to clean the display. Do not use detergents. Make sure no liquid gets inside the product or onto the connectors.
temPeRatURe
Before turning on the player make sure that the temperature inside the car is between -10C and +50C, as the product is only guaranteed to operate properly within this temperature range. Extreme weather
conditions can damage the product.
FINDING tHe RIGHt LOCatION aND INStaLLatION
When installing the product, make sure it will not be exposed to any of the following: - direct sunlight or heat (e.g. from the heating system), - wetness, high humidity, - a significant amount of dust, - strong vibration
USING tHe USB/SD CONNeCtOR
It is possible to connect USB memory, MP3/MP4 players and media players to the unit’s USB port. SD/SDHC/MMC memory cards can be inserted into the memory card slot.
- In certain cases the flawless operation of external USB/SD products is not guaranteed. Manufacturers may, without advance warning, alter the internal design of their products (e.g., chip replacement), which might not
modify the main technical parameters, but can interfere with the operation of similar, albeit legacy units. Therefore even identical models of connected products might operate differently. Do not use USB hubs, but exten-
sion cables may be used.
- The use of USB/SD memory cards greater than 16GB in size is not recommended because access times might increase and playback may become unstable. Only playable files should be stored on the external memory card
because the presence of extraneous data/files can slow down operation or cause malfunction. External storage up to 32GB in size can be used and up to 16 subdirectories can be managed.
- Although not recommended, it is possible to charge a mobile phone from the USB port (5VDC/1,5Amax.).
- For the benefit of preserving the precision contacts it is important to always plug in and remove the USB/SD/SDHC/MMC devices perpendicularly. The connector socket can be damaged if the cards are not inserted straight.
- The use of an SD memory card is recommended instead of USB memory as it can be connected more stably and securely by nature. It also does not project from the unit so there is less of a risk of damaging the unit if it is
struck accidentally. Such damage attributed to the user’s fault are not considered manufacturing defects, therefore, they are not repairable under warranty.
warnings! the manufacturer takes no responsibility for lost or damaged data, even if such loss or damage occurs while using the player. Before connecting the storage device, it is recommended to create
a backup of the data and tracks on it on your personal computer.
PROPeR USaGe OF USB StICKS / SD CaRDS
To avoid malfunction and errors, please observe the following:
- Carefully read the instructions of the USB/SD storage device or media player.
- Do not touch the connectors with your hand or any object; keep the connectors clean.
- Protect the USB/SD device from strong shocks.
- Do not bend, drop, disassemble or modify these devices, and protect them from humidity.
Do not use or store the devices in the following locations:
- Anywhere inside the vehicle where they are exposed to direct sunlight or high temperature.
- Any place with a high humidity or where corrosive materials are present.
- Place the devices in a location where they do not hinder you in driving.
Further important notes:
- USB/SD memory devices may not function properly at extremely high or low temperatures.
- Only use high-quality UDB/SD devices. Depending on their type and condition, even such high-quality products may not always work properly. The proper operation of these devices is not always guaranteed.
- Depending on the type and condition of the USB/SD device and the settings used in the software that encoded the MP3 files, the player may not detect or play back certain files.
- The player is not guaranteed to play copy-protected files (legal copyright protection).
- The USB/SD memory device may need a certain amount of time before playback can start. If the device also includes non-audio files, the time needed for playback to start may be significant.
- The unit can play back files with the extension MP3 and WMA. Do not use this extension on files that do not contain pure audio data. The player cannot process such non-audio data. The noise emitted when playing such
files can damage the speakers and/or amplifiers.
- Do not remove the USB/SD device while playback is in progress. In order to protect it from potential damage, first switch to a different signal source by pressing the MODE button, and only then remove the USB/SD device.
- If you connect a portable audio player instead of a USB/SD memory through the USB port, and the device has an MSC/MTP setting, choose the MTP option.
INStaLLatION
1. Slide the mounting frame off the unit then mount it in the vehicle’s dashboard.
If the mounting frame does not fit tightly in the dashboard, the perforated tabs can be bent outward using a screwdriver to ensure a tight fit. The tabs to be bent should be selected according to the thickness of
the dashboard.
2. Carefully slide the unit all the way into the securely fitted frame. If the vehicle has a console, fasten the head unit’s rear M4 screw to the vehicle. Along with the mounting frame, this provides for a stable fit.
• Depending on the vehicle’s design, additional metal straps or other means of fastening may be required. The manner of installation may differ from the instructions depending on the vehicle model.
• When removing the unit – as well as when mounting it – snap off plastic frame around the front panel. Slide a flat metal plate approximately 8 x 1cm in size into the central guide rail on both sides of the unit. This will
allow the unit to be removed from the metal mounting frame. (If the unit has been fastened at the rear, the bolt must also be unscrewed along with disconnecting the electrical connectors.)
3. Connect the unit’s wiring according to the instructions. Inspect the connectors in the vehicle for suitability according to the wiring instructions in this manual. Make sure that the connections are properly made and
free of short circuits. The speaker wiring should be conducted properly. Seek the help of a specialist if necessary.
• DO NOT connect any of the speaker wires to the vehicle’s or battery’s negative terminal/grounding point! (e.g. black power cable or metal point on the vehicle)
4. Switch on the unit and perform the settings described above. We wish you a pleasant and safe journey!
SPeaKeR CONNeCtIONS / FaULtY CONNeCtION
In some cases, increasing the volume will not proportionally increase the bass level. This is dependent on the number of speakers used and their positioning, moreover, a speaker in the vehicle might also be wired
out of phase.
1. When two front speakers are used:
• Reverse the +/- polarity of either the right or left front speaker (the wires leading to either speaker should be reversed anywhere between the head unit and the speaker).
2. When four speakers are used:
• A., If both the front and rear speakers are built into the doors (or otherwise isolated from each other, such as in an enclosure), then the polarity of either speaker in both the front and rear should be reversed.
• B., If the front speakers are built into the doors but the rear speakers are built into the hat rack panel, then only the polarity of either front speaker should be reversed. The rear speakers’ wires should
remain unaltered.
To prevent hearing loss, do not listen to the device at high volumes for extensive periods of time!
Do not discard with communal waste. At the end of its life, dispose of product at a facility specializing in the collection of electronic waste. If you have any question
or remark in connection with this, contact the seller or local waste management organization. By doing so, you will protect the environment as well as the health
of others and yourself. Do not dispose of used batteries with normal communal waste. The user is obliged under law to take any used or dead batteries to the
local collection facility or point of original purchase. This allows the environmentally friendly disposal of batteries.
