5
5. Plug the unit into a standard earthed wall socket of 230V/50Hz.
6. Now the unit is ready for operation!
CLEANING, MAINTENANCE
1. Before cleaning, disconnect the appliance from the power supply by pulling out the plug.
2. Allow the appliance to cool down. (at least 30 minutes).
3. Clean the outside of the device with a slightly damp cloth. Do not use aggressive cleaning
agents!
4. Do not immerse the appliance in water.
Descaling the water tank and the appliance
If you use non-distilled water, limescale will build up inside the appliance and the water tank
over time. Limescale can block or even prevent steam from escaping from the appliance.
Therefore, we recommend you perform descaling once a month as follows:
1. Switch off the steamer and disconnect its power supply by removing the plug from the
wall socket.
2. Allow the appliance to cool down. (at least 30 minutes).
3. Fill the water tank with 1:1 mixture of vinegar and water.
4. Connect the appliance to the mains and press the steam switch briefly to allow the
solution to travel the inside of the appliance.
5. Disconnect from the mains and leave the solution in the appliance for 40 minutes.
6. Pour the solution out of the water tank and fill it with clean, preferably distilled water.
7. Reconnect to the mains and operate the steamer intermittently (see USE) until the
vinegar odour disappears.
TROUBLESHOOTING
Error observed
Possible resolution of the error
The unit does not work at all
Check the power supply
The appliance does not emit steam Fill the water tank
Check the steam switch
Instead of steam, water drips from
the openings of the steaming surface
Make sure to hold the appliance horizontally during
use.
Wait until the heating indicator goes out.
Water drips from the water tank
Check if the rubber plug of the water tank is in
place
Make sure that the water tank is firmly attached in
its place
Yellow water comes through the
nozzles
Always dry the appliance after use by removing
the water tank and operating it for 10 seconds
