SOMNOmedics SOMNOtouch RESP eco, Инструкция по эксплуатации

Страница: 7 / 54

- 7 -
2.2 Elements of keyboard
Picture Description Function
Status LED 1
Recording
Green LED Yellow LED
Idle Mode off off
Waiting Mode 1x /4s off
Recording Mode 1x /s off
Initialisation / data transfer on off
Status LED 2
Charging
When this LED is Yellow, the battery
is being charged
When this LED is off, the battery is
fully charged
When this LED is off, no charge is
taking place.
Patient Marker
The patient uses the button as a
Marker during the measurement. To
place a marker for denoting an
event, (going to bed, getting up,
taking medication, etc.) the patient
pushes this button.
On/Off
This button switches the device on.
The device switches off again after
30 secs.
If pressing this button together with
the marker button a recording can
be terminated manually
3 Safety instructions
This instruction manual is regarded as part of the instrument and should always be
kept on hand.
The SOMNOtouch™ is NOT designed to be used in a Life Support situation,
surgical rooms, intensive care units, or in emergency vehicles.
The SOMNOtouch™ must be applied only under instruction of a physician.
The
SOMNOtouch™ has no audible alarms for monitoring Pulse and SpO
2.
The
SOMNOtouch™ must be able to measure the pulse properly to obtain accurate
SpO
2
measurement. Verify that nothing is hindering the pulse measurement before
relying on the SpO
2
measurement.
Fingernail polish may reduce light transmission and thereby affect SpO
2
accuracy.
The pulse oximetry device integrated in
SOMNOtouch™ is calibrated to determine
the percentage of arterial oxygen saturation of functional haemoglobin. Significant
levels
of dysfunctional haemoglobin such as carboxyhemoglobin or
methemoglobin may affect the accuracy of the measurement.
Cardiogreen and other intravascular dyes, depending on the concentration, may
affect the accuracy of the SpO
2
measurement.
Check all cables and connections for damage before using this device.