C
SOMFY SYSTEMS, INC. 2/07 P.7 REV.1
1) Press the
DOWN
directional utton
on the transmitter. Shade will travel
to the pre-set
DOWN
limit.
b
Press & hold
MY (stop) Button
Press DOWN
Button
my
Press &
hold UP
& DOWN
Button
my
my
Press &
hold Either
UP
or
DOWN
Button
my
my
my
my
1.
2.
4.
3.
OPTION THREE
Re-adjusting Lower Limit (DOWN Shade Position)
2) Once shade stops at pre-set down limit, press and hold the
UP and
DOWN uttons
simultaneously on the transmitter until the shade jogs.
b
3) Press and hold either the
UP or DOWN utton
on the transmitter to adjust
shade to new position.
4) Press and hold
MY (stop)
utton
until shade jogs. New lower limit (Down
stop position) is now added to memory.
b
b
1) Using a paperclip. Press the
Programming utton
on motor head momentarily.
Shade will begin to operate.
b
OPTION FOUR
Manual Activation of Shade
2) Press the
Programming utton
again to STOP.
3) Press the
Programming utton
again to activate in opposite direction.
NOTE: Shade should already be programmed in order to activate manually.
b
b
Program
Button
LT-30RT Round Head
Roll Up WireFree RTS Programming & Operation Instructions
TM
OPTION FIVE
Activating Step (Tilting) Feature for Sheer Shade Applications
1) Press the
Down directional utton
on the transmitter. Shade will travel to
pre-set DOWN limit.
2) Press and hold the
DOWN utton
on the transmitter until shade begins
to “step” or tilt.
3) Release the
DOWN utton
on the transmitter once new position is reached.
NOTE: Shade must be already programmed to activate tilting feature.
b
b
b
