Press MY (stop)
Button
my
Press MY (stop)
and UP Button
4.
3.
3) Press the
MY (stop) utton
when the shade reaches the desired lower
limit (shade position). If necessary, adjust the desired shade position
with a brief press of either the
UP or DOWN utton
.
b
b
4) Once desired lower limit (shade position) is reached, press and hold
MY (stop)
and
UP uttons
simultaneously until the shade begins to
move up, then release.
b
my
Press MY (stop)
Button
5.
my
5) Once shade stops at previously set upper limit (shade position), press and
hold the
MY (stop) utton
for 2 seconds until the shade jogs. This confirms
both limits (shade positions).
To complete programming proceed to STEP FIVE
b
1.
2.
Starting with shade in up position
1) Press and hold the
DOWN or UP utton
on the transmitter to
reach the desired upper limit (shade position).
NOTE: During limit setting, shade operates in 3ft. increments
only. If shade stops prior to reaching desired limit (final shade position) release
then press and hold the down button until the shade begins to move.
b
2) Once the desired upper limit (shade position) is reached, press and hold
the
MY (stop)
and
DOWN uttons
simultaneously until the
shade begins to move down, then release.
b
Press and
hold UP
or
DOWN Button
my
my
Press MY (stop)
and DOWN Button
my
5.
Press MY (stop)
Button for 2 seconds
5)
Once shade stops at previously set lower limit (shade position), press the
MY (stop) utton
for 2 seconds until the shade jogs. This confirms both
limits (shade positions).
To complete programming, proceed to STEP FIVE
b
P.3
LT-30RT Round Head
Roll Up WireFree RTS Programming & Operation Instructions
TM
STEP FOUR
Setting Limits (Shade Positions) continued.
