Press & hold
My (stop) Button
my
4.
4) Press and hold the
MY (stop) utton
until the shade jogs.
New Upper Limit (Up stop Position) is now added to memory.
b
my
Press &
hold UP
& DOWN
Button
my
my
Press &
hold Either
UP
or
DOWN
Button
my
2.
3.
2) Once shade stops at pre-set up limit, press and hold the
UP and
DOWN uttons
simultaneously on the transmitter until the shade jogs.
b
3) Press and hold either the
UP or DOWN utton
on the transmitter to adjust
shade to new position.
b
my
Press MY (stop)
Button
3.
Press UP
Button
my
my
1.
1) Press the
UP directional utton
on the transmitter. Shade will travel to
the pre-set UP limit.
b
Note: Shade should be stationary prior to activating intermediate position function.
If shade is actively moving (in-motion) MY (stop) utton should be pressed twice.
To Delete: Activate shade to (IP) position, then press and hold the MY (stop) utton
for 5 seconds. Shade will jog to confirm deletion.
b
b
3)
Activate the shade intermediate position by pressing the
MY (stop) utton
from ANY shade position.
b
Re-adjusting Upper Limit (UP Shade Position)
OPTION TWO
my
Press & hold
MY (stop) Button
2.
2)
Once the desired Intermediate position is reached, Press and hold the
MY (stop)
utton
on the transmitter until the shade jogs. Intermediate position
is now added to memory
b
P.6
LT-30RT Round Head
Roll Up WireFree RTS Programming & Operation Instructions
TM
OPTION ONE
Setting an Intermediate Position (IP) continued.
