Copyright © 2012 Somfy SAS. All rights reserved.
2
TaHoma
®
Sensor Module
EN
"#
7 2 = 2 2
status of a detector changes:
1) Select "MY SETTINGS" on the TaHoma
®
interface home
"2 2 2 = 2
"sensors" tab.
2) ) 2 2 ¥
new window opens, in which you can:
associate a scenario with a change in status of the
detector (drag and drop your chosen scenario inside
the dotted lines),
2 $ 2 {¦2 2 =<"
2 $ 2 ¦2 2 =<
* if previously activated (see "Prerequisites" section).
"$
7$2 $ 2 7
®
"2 2 "
and select a detector.
In the new window:
- The icon (
c
) shows the status of the detector.
- The button (
d
) can be pressed to activate, deactivate
or schedule the activation of the detector (
green =
activated,
red = deactivated,
2 $
1
2
Fumée
c
d
6. OVERVIEW OF FUNCTIONS
Radio frequency: 433.42 - 433.92 MHz
Radio range: 15 m through 2 concrete walls.
The building in which the product is used may
reduce the radio range.
Protection rating: IP30
Operating temperature: 0°C to +60°C
Dimensions: 90 x 50 x 25 mm
Power supply: USB
USB port: Mini-B
7. TECHNICAL DATA
The TaHoma
®
unit must be switched on and connected
to the Internet to use the TaHoma
®
Sensor Module.
1) Connect the TaHoma
®
Sensor Module to the TaHoma
®
unit using the USB cable supplied (USB port on the
rear of the unit).
Position the TaHoma
®
Sensor Module at least 30
cm away from the TaHoma
®
unit and the broadband
modem.
2) Log in to the Somfy user web site and go to the
TaHoma
®
interface from "my account".
- Select "CONFIGURATION" on the home page, and then
2 =
- ) "$ 2 "
the instructions that appear on screen.
2
5. SET UP
%&
1
> 30 cm
> 30 cm
