32
EN
- SLIDYMOOVE 300 installation and operating guide - SOMFY
E
N
EN
6
Repairs
1
2
3
4
5
>2s
x2
•
Press the
button on
the control
electronics for
2 seconds.
The
indicator light
comes on.
•
Place the
memorised
remote control
on the target.
•
Keep
button
1
of the
remote control
depressed until
the indicator
light
flashes.
•
Press
button 1
on the remote
control twice.
The "RESET"
indicator light
flashes.
To clear the settings*
To clear the settings* and the
memorised remote controls/control
points
6
•
Keep
button 2
of
the remote control
depressed until the
“RESET” indicator
light comes on
.
6
•
Keep
button 2
of
the remote control
depressed until the
all
the indicator lights
come on
.
7
The indicator light flashes twice (see page
16 to run a auto-programming procedure).
*Gate travel, deactivation of the settings, ...
6.3 Clear the settings
When should I delete the settings?
• ANer auto-programming
, if you change the position opening stop, if you change the motor cables
or if you add a safety edge to the gate.
•
If the
gate opens at random
due to normal wear of the gate.
