26
EN
- SLIDYMOOVE 300 installation and operating guide - SOMFY
E
N
EN
4
Advanced parameter settings
"
Field of application
Set the gate speed in accordance with the table below:
WARNING
If the speed setting is changed, the installer must check that the obstacle detection system
complies with appendix A of standard EN 12 453. Failure to follow these instructions could result in
serious injury, e.g. crushing by the gate.
4.3 Gate speed
By default, the gate operates at standard speed
DANGER
Any change to the gate speed setting must be performed by a professional motor and home
automation installer. Any changes which do not comply with these instructions represent a danger to
the safety of both people and property.
Gate weight
Standard speed
Slow speed
0 to <100 kg
100 to <200 kg
200 to <300 kg
+ safety edge*
*Installation of a passive safety edge (ref. 9014597) mandatory on the gate.
1
2
3
4
5
>2s
x1
•
Press the
button on
the control
electronics for 2
seconds.
The indicator
light comes
on.
•
Position the
remote control
on the control
electronics
target.
•
Keep
button
1
of the
remote control
depressed until
the indicator
light
flashes.
•
Press
button 1
on the remote
control once.
Indicator light P1
flashes.
Setting slow speed
