30
EN
- SLIDYMOOVE 300 installation and operating guide - SOMFY
E
N
EN
5
Programming the remote controls
5.2 Adding a remote control
See “Clearing the settings” page 32.
1
2
3
>2s
<0,5s
•
Press the
button on
the control electronics
for 2 seconds.
The indicator light
comes on.
•
Position the remote
control on the control
electronics target.
•
Briefly press a button on the remote control
to be programmed.
The
RADIO
indicator light will come on then
go out when you release the button on the
remote control.
The remote control has been memorised.
A
3-button remote control
A
2 or 4-button remote control
5.3 Deleting a remote control
1
2
3
>2s
<0,5s
•
Press the
button on
the control electronics
for 2 seconds.
The indicator light
comes on.
•
Position the new
remote control to be
programmed on the
control electronics
target.
•
Briefly press the button on the remote
control to be programmed. The
RADIO
indicator light will come on then go out
when you release the button on the remote
control.
Complete opening is programmed on
this button.