12
3.2. Optional features
3.2.1. Vertical/horizontal fume outlet
All our free standing fire models can be provided with either a horizontal OR vertical fume
outlet, at the client's choice. Please note that this unit comes pre-installed with the vertical option.
To change the fume outlet initial vertical position to the horizontal position, please follow
these steps:
TEK Basic and TEK Stone models:
1-
Remove the top cover of the unit by sliding it horizontally and backwards to place the
guide pins in their rearmost position. With the pins in this position, carefully lift and
remove the top cover. For
the “Tek Stone” model, just carefully lift the top cover and
remove it away from the unit. The stone cover is fixed in position on the top of the unit
by its own weight;
2-
Remove the fume baffle (as described in section 9.2 under the "Cleaning and
Maintenance" chapter) taking care not to damage any of the vermiculite plates;
3-
On the rear side of the stove, open the section corresponding to the horizontal fume
outlet. To do this, use cutting pliers to cut off the mini-joints that secure this section to
the external casing of the unit;
1st
ste
2n
d
Fig.13 – Removing the top metal cover
(A)
(A)
(A)
Fig. 14 – Rear view of each model; (A) Section to be removed
before changing the fume outlet to the horizontal position.
Содержание TEK Basic
