8
Figure 5 - Rear view of the equipment; (M) section to remove for external air inlet
After removing the cover, place the optional air inlet kit as shown in Figure 6, tightening the kit with
the 4 nuts that come in the package.
Figure 6 - Rear view of the equipment, placement of the outside air inlet kit
The cover that you removed to place the external air inlet kit must be placed in the lower part of the
equipment, as shown in Figure 7, to do this you must loosen the 3 screws that fix the base to the
equipment to have access to the place where you place the cover.
Then you must fix the cover with the 4 nuts that you removed from the rear of the equipment, thus
covering the external air intake.
Figure 7 - Bottom view of the equipment, blocking the external air intake under the equipment
Unscrew the 4
nuts and remove
the cover.
Placement
of
the outside air
inlet kit.
Loosen the 3 screws that fix the base to the equipment.
Fixing the cover, blocking the outside air intake.
