7
3.2. Optional
3.2.1. Vertical/horizontal fume outlet
The Amber stove has the option of using the smoke outlet horizontally or vertically, the latter being
the way in which the salamander is prepared for the customer.
To convert the smoke outlet to horizontal mode, the vermiculite pieces must be removed from the
combustion chamber, the double baffle must be removed by loosening the two screws that fix it, and
the screws that fix the neck must be loosened. Then do the reverse process to reposition the parts
you have removed.
With the bottleneck in the horizontal position, it may originate some smoke exit through the door, at
the moment of lighting the equipment, for this reason, it is recommended that the bottleneck is in the
vertical position, to obtain a good draught of smoke and reduce the smoke exit at the moment of
lighting.
3.2.2. Connecting the external air inlet
If you wish to use the external air inlet, you should purchase this optional kit separately.
The purpose of this optional accessory is to establish a connection point between the equipment and
the outside ambient air, thus installing a more suitable piping for this purpose. This optional accessory
is intended to provide the connection of a tube that allows the equipment to be supplied with air from
outside.
You can supply the equipment with outside air in the following ways:
1-
From the back of the equipment in the lower area:
If it is at the rear of the equipment at the bottom of the side covers, as shown in Figure 4, the microdots
of the side covers must be broken (M).
Figure 4 - Rear view of the equipment; (M) section to remove for external air inlet
Then remove the cover that blocks the external air inlet by loosening the 4 nuts as shown in Figure 5.
(M)
