31
aggressive environments such as proximity of the sea or river, as well as those derived from excessive
water pressure, inadequate power supply (voltage with variations greater than 10%, with a nominal
value of 230V, or, neutral voltage greater than 5V, or absence of earth protection); pressure or supply
of inadequate circuits, acts of vandalism, urban confrontation and armed conflict of any kind, as well
as derivatives;
4.12. Failure to use the fuel recommended by the manufacturer is a condition of exclusion from the
Warranty.;
Explanatory note: In the case of pellet appliances the used fuel must be certified by EN 14961-2 grade
A1. Also, before buying large quantity you should test the fuel to see how it behaves. In wood
equipment, this moisture content must be of less than 20%.
4.13. The appearance of condensation, either by poor installation or by the use of non-virgin fuels
(such as pallets or wood impregnated with paints or varnishes, salt or other components), which may
contribute to the accelerated degradation of equipment and especially to your combustion chamber;
4.14. All Products, Components or damaged components in transportation or installation;
4.15. Cleaning operations carried out on the appliance or its components due to condensation, fuel
quality, bad settings or other circumstances of the installation lacation. Also excluded from the
Waranty are interventions for the descalsification of the Product (the removal of limestone or other
materials deposited inside the apparatus and produced by the quality of the water supply). Also
excluded from this warrnty are air bleeding interventions of the circuit or unblocking of circulating
pumps.
4.16. The installation of the equipment supplied by Solzaima, S.A. should contemplate the possibility
of their easy removal, as well as points of access to the mechanical, hydraulic and electronic
components of the equipment and the installation. When the installation does not allow immediate and
safe access to the equipment, the additional cost of access and security will always be borne by the
Buyer. The cost of disassembling and assembling boxes of plasterboard or masonry walls, insulation or
other elements such as chimneys and hydraulic connections that prevent free access to the Product (if
the Product is installed inside a carton of plasterboard , masonry or other dedicated space must
comply with the dimensions and characteristics indicated in the instruction manual and use
accompanying the appliance).
4.17. Interventions of information or clarification at home about the use of its heating system,
programming and / or reprogramming of control and regulating elements, such as thermostats,
regulators, programmers, etc.;
4.18. Interventions for the adjustment of fuel receipes in pellet devices, cleaning, detection of water
leaks in pipes external to the apparatus, damage caused due to the need to clean the gas evacuation
machinery or flues;
