112
Version 1.0
4.3.2
Wireless Setup
There are 2 ways of hardware connection via
Wired
upper link and
Wireless
upper link.
First step is to name your ESSID, and the default value is
Wireless_Mobile_Router
.
Please follow the illustrations below to proceed.
For selecting AP/Bridge wireless connection, the
Channel 6
is the default channel; all
devices on the network must be set to the same channel to communication on the network.
The default
TxPreamble
setting is Long (if you use high traffic networks should use the
shorter preamble type).
Authentication
is the security function to prevent the connection
requests from unauthorized wireless clients. As the
Encryption Type
, select WEP or WPA
can protect your data from eavesdroppers, if you do not need the encryption, select
“None” to skip the following setting.
After checking each above and choose the suitable item by demand, click
Next
to
proceed.
Notice: If uses AP/Bridge to wirelessly connect to the router, here suggests disabling the DHCP in LAN Setup.
Please refer to
4.3.1 LAN Setup
.
Select AP/Bridge from the drop-down list.
You can use the default ESSID
unless more than one AP/Router
is deployed in the same area.
And it will show while searching
the wireless signal.
Содержание 3GWIFIMRD
Страница 1: ...Version 1 0 1 3GWIFIMRD 3 5G plus WLAN Desktop Server Router User Manual ...
Страница 18: ...Version 1 0 18 If it can t work it will show Request timed out ...
Страница 209: ...209 Version 1 0 ...
Страница 212: ...212 Version 1 0 Step 9 Your hostname has been created when you see the following page ...