©2020 Solwave ovens
Lancaster, Pennsylvania,17603
Page 9 of 15
Part No. 20037909
Original Instructions
User Options
Changing user options
Options such as single or double key programming, beep volume, and maximum
cooking time can be changed to suit individual preferences.
To change options:
1. Open oven door.
• If door is closed or STOP/RESET key is pressed before programming is
complete, changes are discarded and microwave exits programming mode.
2. Press and hold key 2 for approximately 5 seconds.
• This begins options mode.
• Microwave will beep and 0P: -- displays. Microwave is now in
programming mode.
3. Press number key that controls option to be changed.
• See table below for options.
• Current option will display.
4. Press number key again to change the option.
• Each time key is pressed, option will change.
• Match number code displayed with descriptions for desired option.
5. Press START key to save changes.
• 0P: -- shows in display.
• To change additional options, repeat steps 3 and 4.
• Changes appear after door is closed or STOP/RESET pad is
pressed.
Didn’t like an option?
Factory settings are marked in bold.
To change the oven back to the factory
setting, simply select the option that is
marked in bold.
My changes weren’t
saved.
In order for any changes to be
saved, the START key must
be pressed after selecting an option.
Shutting the oven door or pressing the
STOP/RESET key will not save changes.
NUMBERED PADS
DISPLAY
OPTIONS (FACTORY SETTINGS IN BOLD)
1
End of Cycle Beep
OP:10
OP:11
OP:12
3 second continuous beep
Continuous beep until door is opened
5 beep bursts until door is open
2
Speaker Volume
OP:20
OP:21
OP:22
OP:23
Eliminates beep
Sets volume to low
Sets volume to medium
Sets volume to high
3
Key Beep
OP:30
OP:31
Prevents beep when pad is pressed
Allows beep when pad is pressed
4
Keyboard Enable
Window
OP:40
OP:41
OP:42
OP:43
15 seconds after oven door is opened, keyboard disabled
30 seconds after oven door is opened, keyboard disabled
1 minute after oven door is opened, keyboard disabled
2 minutes after oven door is opened, keyboard disabled
5
Add Time During
Heating
OP:50
OP:51
Prevents adding heating time while oven is heating
Allows heating time to be changed while oven is heating when a memory pad is
pressed
6*
Reset to Ready Mode
OP:60
OP:61
Opening oven door does not reset oven back to ready mode
Opening oven door resets oven back to ready mode.
7*
Maximum Heating Time
OP:70
OP:71
Allows 60 minutes of heating time
Allows 10 minutes of heating time
8
Manual Operation
OP:80
OP:81
Allows use of preprogrammed pads only
Allows use of manual time entry and preprogrammed pads
9
Double Digit Operation
OP:90
OP:91
Allows 10 (0-9) preprogrammd pads
Allows 100 (00-99) preprogrammed pads
0
Clean Filter Message
OP:00
OP:01
OP:02
OP:03
Do not display message
Display message for 24 hours every 7 days
Display message for 24 hours every 30 days
Display message for 24 hours every 90 days
Factory setting may vary by model
2
