©2020 Solwave ovens
Lancaster, Pennsylvania,17603
Page 5 of 15
Part No. 20037909
Original Instructions
Control Panel and Features
2
3
4
5
6
7
8
9
0
1
(C)
(F)
(G)
(H)
(I)
(i)
(A)
(B)
(D)
(E)
(ii)
(J)
The switching operation of this microwave oven can cause voltage fluctuations on the supply line. The operation of this oven under unfavorable voltage supply
conditions can have adverse effects. This device is intended for the connection to a power supply system with a maximum permissible system impedance Zmax of
0.10 Ohms
at the interface point of the user’s supply. The user has to ensure that this device is connected only to a power supply system which fulfills the requirement
above. If necessary, the user can ask the public power supply company for the system impedance at the interface point.
Control Panel Features
(A)
DISPLAY
(B)
HOLD KEYPAD
(C)
20% POWER/DEFROST KEYPAD
(D)
50% POWER KEYPAD
(E)
70% POWER KEYPAD
(F)
MANUAL TIME ENTRY MODE
Allows the operator to heat without changing the preset program keypads.
(G)
STOP/RESET KEYPAD
Interrupts operation, and/or exits modes.
(H)
START/OK KEYPAD
Begins cooking in Manual Time Entry Mode. Restarts an interrupted cooking cycle.
Used to save settings and entries.
(I)
X2 - DOUBLE QUANTITY COOKING
Increases a preset cook time by a percentage of the original cook time, also know
as a COOK FACTOR. Used for cooking multiple servings of foods.
(J)
NUMBER KEYPADS
Used to operate preset cooking programs; enter settings; and/or activate
secondary keypad functions.
(K)
SECONDARY FUNCTION KEYPADS
To activate, press and hold corresponding number keypad.
(i)
Programming Mode
(keypad “1”)
Edit preset programs and/or create new programs for customized cooking.
(ii)
User Options
(keypad “2”)
Allows the user to customize various oven settings.
Programming Features
STAGE COOKING
Allows operator to use up to four different cooking cycles
or stages consecutively without repeated input from the
operator. For example, stage cooking could be set to
defrost food initially, then cook it, and then keep the food
warm until serving time.
PRESET PROGRAM KEYPADS
Oven can store between 10 to 100 cooking programs in
memory.
A. Single Digit Keypad Cooking
From the factory, the oven is programmed to store 10
cooking programs (0-9). Each keypad begins a cooking
program.
B. Double Digit Keypad Cooking
The oven control can be changed to store up to 100
cooking programs (00-99). Each entry will be assigned
a double digit number, for example 01, 05, or 20. When
using the double keypad programming, two keypads
must be pressed to start the cooking cycle.
Note:
To set control to Double Digit Entry, see “User Options”
section in this manual
Methods of Cooking &
Programming
COOKING WITH PRESET PROGRAM KEYPADS
Allows operator to quickly activate saved cooking
sequences using 1-2 keypad strokes
MANUAL TIME ENTRY COOKING
Allows operator to heat without changing the preset
program keypads
MANUAL KEYPAD PROGRAMMING
Allows operator to use keypads to edit preset programs
and/or create new programs for customized cooking.
