Solter aeroprocess 4200 DV, Инструкция по эксплуатации

Страница: 31 / 59

TECHNICAL SPECIFICATIONS
The machine is designed to be used outdoors. However, it should be protected from rainfall while it’s in use.
PROTECTION
The machine features all necessary protective measures to ensure proper operation. Temperature sensors ensure
that the components are kept within the operating range.
Monitoring of the supply voltage ensures that the machine operates within expected ranges and, in case of excee-
ding them, is disconnected to prevent possible anomalies.
VENTILATION
The machine contains a smart ventilation system, which will only be activated if the machine is operating or if the in-
ternal temperature is high. The automatic ventilation system will prevent the machine from accumulating dust, redu-
cing maintenance intervals. This does not imply that the user must not be careful about producing metal powder and
particles while using the machine. You should check that the vents are not clogged, because the clogging of the
vents can reduce the nominal operating cycle specified for the machine.
OPERATING CYCLE AND OVERHEATING
The operating cycle is the percentage of 10 minutes during which the unit can weld at the required power without
overheating. If machine becomes overheated, the welding power will stop. The screen will display an alarm showing
which internal module is the one that has been overheated. The fans turn until the internal temperature is below
40°C. The machine will automatically reset when it reaches a safe temperature again. However, it is recommended to
wait at least 5 minutes before starting to work normally again.
To avoid overheating, reduce the adjusted welding power or the length of the welds.
Input voltage (U1) 3PH 400V (360-440)
Maximum input current (I1 máx) 34A
No-load voltage (U0) 70V DC
Max. absorbed power 23KVA
Fuse 20A slow
MIG-MAG duty cyle (40ºC) 35% 420A / 35,0V
MIG-MAG duty cyle (40ºC) 60% 385A / 33,3V
MIG-MAG duty cyle (40ºC) 100% 350A / 31,5V
MMA duty cyle (40ºC) 35% 420A / 36,8V
MMA duty cyle (40ºC) 60% 385A / 35,4V
MMA duty cyle (40ºC) 100% 350A / 34,0V
TIG duty cyle (40ºC) 35% 420A / 26,8V
TIG duty cyle (40ºC) 60% 385A / 25,4V
TIG duty cyle (40ºC) 100% 350A / 24,0V
MIG-MAG regulation range 10 - 420A (14,5-35,0V)
MMA regulation range 10 - 420A (20,4-36,8V)
TIG regulation range 10 - 420A (10,4-26,8V)
Max. wire speed 25 m/min
Rollers 4R
Motor power 95W
Suitable wire coil D300 - 15Kg
Temperature protection class H (180º)
IP protection class IP 23 S
EMC class A
Ventilation Automatic
Weight 27 Kg
Dimensions 655x275x385mm
Standards IEC 60974-1 / IEC 60974-10
SOLTER
SOLDADURA S.L.
AEROPROCESS 4