UM0005_ASW 8-20K-LT-G2_EN_V03_1121 17
4.2 Mounting the inverter
Mounting procedure:
1. Use the wall bracket as a drilling template and mark the
positions of the drill holes, then drill 3 holes (Φ10) to a depth
about 70mm. During operation, keep the drill vertical to the
wall, and hold the drill steady to avoid tilted holes.
Risk of injury when lifting the inverter, or if it is dropped
The weight of Solplanet inverter is max. 18.6 kg. There is risk
of injury if the inverter is lifted incorrectly or dropped while
being transported or when attaching it to or removing it from
the wall bracket.
• Transport and lift the inverter carefully.
Risk of injury due to damaged cables
There may be power cables or other supply lines (e.g. gas or
water) routed in the wall.
• Ensure that no lines are laid in the wall which could be
damaged when drilling holes.
