SOLOY AVIATION SOLUTIONS
CESSNA 206 WITH WING MOUNT CAMERA
MAINTENANCE MANUAL SUPPLEMENT
WINGS 57-42-00
DOVETAIL MOUNT - INSPECTION
October,
2011
Page 601
DOVETAIL MOUNT – INSPECTION
1. DOVETAIL MOUNT – INSPECTION
(Figure 3)
A. Verify that the dovetail fasteners (4) are tight and safety wired.
B. Check dovetail stop pin (1) for security and condition.
C. Inspect contact surfaces (2) of the dovetail mount for wear, cracks or other
deformation.
D. Check locking notches (3) for deformation and wear.
E. Inspect overall condition of mount and check for cracks around fastener locations
and around dovetail block.
NOTE
If performing unscheduled inspection (Chapter 05-50-00),
perform dye penetrant inspection on contact surfaces (2)
per ASTM-E-1417, type I, method B, level 3 or better.
MIL-STD-1907 grade A criteria to apply.
1. Stop
Pin
3. Locking
Notches
2. Contact Surfaces
4. Dovetail Fastener Locations
(4 places)
Figure 3:
Dovetail Mount Inspection Areas
4
2
3
1