SOLOY AVIATION SOLUTIONS
CESSNA 206 WITH WING MOUNT CAMERA
MAINTENANCE MANUAL SUPPLEMENT
WINGS 57-41-02
INTERCOSTAL WEB AND BLOCKS - INSPECTION
October,
2011
Page 601
INTERCOSTAL WEB AND BLOCKS – INSPECTION
1.
INTERCOSTAL WEB AND BLOCKS – INSPECTION
(Figure 1)
A. Cut safety wire and remove bolts from dovetail mount. Tagging or otherwise
identifying dovetail spacer locations on spacers will facilitate reassembly.
B. Remove wing access panels 510YBS and 510ZBS.
C. Check for loose or missing fasteners (3).
D. Inspect the threaded insert in the end of the intercostal block (2) for loose, cross
threaded or missing thread. Also check that the insert has not rotated inside the
intercostal block.
E. Inspect the intercostal block for cracking or other damage.
F. Inspect intercostal web and wing ribs (1) for cracking or deflection around rivet
locations.
G. Prior to reinstalling the dovetail mount and wing access panels, perform an
inspection of the intercostal spar blocks. Refer to Section 57-41-01 SPAR
BLOCKS – INSPECTION.
NOTE
No repairs are allowed for the intercostal web or blocks.
Loose or missing fasteners may be replaced if the fastener
hole has not been damaged. Replace intercostal web or
block if any damage is found.