9
INSTALLATION
2.1 Safety Clearance
The minimum clearance to the wall shall be larger than 30cm in order to ensure
proper ventilation.
In the event the ambient temperature is high, it’s recommended to increase the
distance of safety clearance to improve the heat dissipation.
2.2 Mounting Inverter on the Wall
The inverter is designed to either be placed on horizontal surface or be mounted on
the wall with various ways (as shown below). When mounting the inverter on the
wall,
1
）
The wall shall be solid and strong enough to carry the inverter;
2
）
The location of installation shall allow the user to read the LCD easily;
3
）
Two screws shall be firstly fixed on the wall (distance as shown below) so that
the inverter can be hung on the screws, recommended screw size is
M4*50~65mm.
4
）
After mounting the inverter, make sure it’s firmly mounted and won’t easily fall
off in the event of unexpected earthquake or vibration.
2.3 Batteries
Determine the size of battery
The inverter is designed with pre-set charging current and voltage. Given a fixed
charging current, under-sized batteries may shorten the battery life while over-sized
batteries may result in unreasonable recharging time.
It’s recommended the batteries capacity shall be no less than 100Ah.
