6. Com missioning
6.1 Preparation of Commissioning
• Ensure all the devices are accessible for operation, maintenance and service.
• Check and confirm that the inverter is firmly installed.
• Space for ventilation is sufficient for one inverter or multiple inverters.
• Nothing is left on the top of the inverter or battery module.
• Inverter and accessories are correctly connected.
• Cables are routed in safe place or protected against mechanical damage .
• Warning signs and labels are suitably affixed and durable.
6.2 Commissioning Procedure
If all the items mentioned above meet the requirements , proceed as follows to start up
the inverter for the first time.
1. Turn on inverter DC switch
2. Turn on battery breaker or battery switch button on the battery.
3. Select the grid standard code.
4. Configure the parameters.
5. Switch on AC backup and AC grid.
6. Verify inverter initializing.
6.3 Shutdown procedure
1. Turn off the AC isolator at the grid connection point.
2. Turn off the DC switch of the inverter.
3. Turn off the DC switch between inverter and battery.
4. Waiting for the LCD of inverter to turn off and the system shutdown is completed.
. 52.
7. Maintenance
Solis RHl-5G Series inverter does not require any regular maintenance. However, cleaning the
heatsink will help inverter dissipating heat and increase the lifetime of inverter. The dirt on the
inverter can be cleaned with a soft brush.
CAUTION:
Do not touch the surface when the inverter is operating. Some parts may be hot
and cause burns. Turn OFF the inverter (refer to Section 6.2) and let it cool down
before you do any maintenance or cleaning of inverter.
The LCD and the
LED
status indicator lights can be cleaned with cloth if they are too dirty
to be read.
Note:
Never use any solvents , abrasives or corrosive materials to clean the inverter.
.53 .
