Solinst 464 Mk3, Руководство пользователя

Страница: 17 / 20

Model 464 Electronic Pump Control Unit User Guide
Page 13
4.0 Accessories
The 12 Volt Compressor connects to the Model 464 Electronic Pump Control
Unit using the 464 Supply Line. It is ideal for low flow applications of less than
100 ft (30 m) depths. It operates using 12 volt DC power source, such as a car
or truck vehicle battery, and comes with alligator clips. The compressor operates
at up to 125 psi and is equipped with a 2 US gallon (7.6 L) air tank which is
rated to 150 psi.
When using the 12 Volt Compressor, or any other air compressor with the
Model 464 Electronic Control Unit, it is recommended to use the External Filter.
The External Filter connects to the 464 Supply Line, and reduces the risk of
moisture entering the Control Unit.
See separate operating and installation instructions for the 12 Volt Compressor
and 464 External Filter.
Figure 4-1
12 Volt Compressor
(pt#106009)
Figure 4-2
464 External Filter
with Draining Valve
(pt#112832)
NOTE
When using a compressor, the drain
at the base of the tank should be
opened on a daily basis to prevent
moisture build-up.
NOTE
The Control Unit has a built-in
moisture filter to prevent moisture
from the supply line entering the
Control Unit, however, the External
Filter is recommended for use with
air compressors.
NOTE
Large compressors should be fitted
with a dryer to reduce moisture in
the supply lines.
Draining valve is closed
Draining valve is open