Solidyne DX 816, Руководство пользователя

Страница: 10 / 29

The headphones signal at the Studio is never muted.
Studio headphones receives the signal assigned in
console and the talk-back circuit.
WARNING
Do not use audio RJ45 cables to connect the STUDIO
MONITOR output. The pin-out used is not compatible
with StudioHub wires.
For more information please see “4.- Monitoring
docks Solidyne HD3 & HD5.
2.7.3.1 Monitoring setup without Solidyne
StudioBox
In order to connect with any standard headphones
mixer/amplifier and active loudspeakers; an adapter
patch cord is supplied from factory .
The next diagram shows the available signals at
STUDIO MONITOR OUT and their basic connections.
RJ-45
STUDIO MONITOR OUT
# SIGNAL
1
2
3
4
5
6
7
8 Headphones LEFT (+4 dBu)
Headphones RIGHT
GND
ON-AIR (+14 V)
Talck-back to Control Room
VDC + 14 V
Speakers LEFT (+4 dBu)
Speakers RIGHT
*Chassis = GND
Figure 7: Connection of loudspeakers and headphones
into the Studio using a standard headphone amplifier.
2.7 Connecting standard lines
The hybrid channel manages two land lines (POTS)
and one cell phone linked by Bluetooth.
On the rear panel there are four RJ11: Two for the
telephonic lines, and two for their associated tele-
phones. The phone lines can be connected directly
to public central or to a private central (PBX). The
private central sometimes deteriorates the rejec-
tion factor of the hybrid, reason why we recom-
mend to connect the console directly to the public
central, whenever it is possible.
The
associate telephones (used generally by the
Production to answer the calls) are connected to
RJ11 labeles as “SET” .
DO NOT PICK UP THE PHONE WHEN A CALL IS ON-
AIR. The telephone remains connected when the
console take the line. If you pick up the handset, the
phone will go live.
Page 10 DX816 & DX822 - Broadcast mixing consoles SOLIDYNE