Network I/O Stagebox SB 32.24 User Guide
Hardware Connections:
DANTE Connections
SB 32.24 has two redundant sets of network connections. The Network A ports feature etherCON
ruggedised RJ45 connectors, and the Network B ports are SFP cages, which can be fitted with either
RJ45, Single-mode or Multi-mode LC fibre connectors.
The SB 32.24 Network connections can be configured in two different modes:
In the first mode, the A and B networks are linked internally (
A+B Network Link
LEDs are ON). In
this mode, both Network A and Network B are identical and output both the gain-dependant and
gain-compensated audio. Dante devices can subscribe to either one.
In second mode, the A and B networks are discrete (
A+B Network Link
LEDs are OFF), and
isolated from each other. In this mode Network A transmits uncompensated audio (and receives
audio for the analogue and AES outputs and also control data) and Network B transmits the
compensated audio only.
Note that they have to be synchronised to the same clock source.
Status & Reset (DHCP)
A+B Network Link
LED indicates unit is configured to connect internal
A and B networks
Off
:
Networks not linked
Green
:
Network A and Network B Linked
Dante B SRC
LED is reserved for future possibilities!
Reset DHCP
independently resets the internal Networks to DHCP
supplied addresses. Insert a small ‘prodder’ into the relevant opening
and press and hold for approx. 3 seconds to reset to DHCP addressing. The LED on the chosen port
will briefly turn red to indicate this has happened.
Factory Reset
If BOTH
Reset DHCP
buttons are held for 6 seconds, this will trigger a Factory Reset of the
stagebox.
Page 8 of 25
Содержание SB 32.24
Страница 1: ......