Solid State Logic SB 32.24 Скачать руководство пользователя страница 16

Страница: 16 / 25

Network I/O Stagebox SB 32.24 User Guide

Contents

Ownership

When multiple SSL consoles are connected to the Dante Network, each console has the ability to

adjust all parameters and settings for SSL Network I/O Stageboxes.

SSL Network I/O Stageboxes can be controlled by all SSL Live consoles, SSL System T consoles as

well as computers running the SSL Network I/O Controller PC application (which can be downloaded

from the SSL website).

The concept of ownership has been introduced to assign one owner to each stagebox parameter, so

that there can be no conflicts for control.

To ‘own’ a Network I/O Stagebox, tap on the stagebox name and its

Detail View

will appear.

Note: In an SSL Live system, first the device must be listed in the

Configured Devices

list.

There are three levels of ownership:

●

Stagebox ownership: control SB 32.24 setup information only

●

Input ownership: control input parameters only

●

Input x ownership: control of input parameters on a per input basis

To become the Stagebox owner, press and hold the

STAGEBOX OWNERSHIP

button in the SB

32.24’s GUI

Detail View

. The Stagebox owner is listed in cyan beside this button.

To become the owner of ALL inputs, press and hold

INPUT OWNERSHIP.

To become the owner of one or more specific inputs, first tap

Inputs

to the right of the

SB 32.24's

Detail View

. Tap on the desired input and press

EDIT SETTINGS

. Then press and hold

OWN

Multiple control devices can ‘own’ different settings of the device at the same time. But there can

never be more than one owner for the same parameter.

To release ownership, locate the owned parameter in the device's

Detail View

and press and hold

REL

To release Stagebox Ownership, press and hold the

STAGEBOX OWNERSHIP

button to toggle it

off.

Ownership can be ‘taken’ from other owners. To do this locate the desired parameter and press and

hold

TAKE

Note: Ownership does not need to be released before it is taken.

To find out which device is currently the owner of a parameter, locate the parameter in the device's

Detail View

. Next to the buttons for

OWN

TAKE

REL

there is a label area showing the network

name of the owner device.

Page 16 of 25

Содержание SB 32.24


























Результаты поиска

Содержание SB 32.24

Отзывы:

Похожие инструкции для SB 32.24

Бренды по названию

Популярные бренды

Solid State Logic SB 32.24, Руководство пользователя

Результаты поиска

Содержание SB 32.24

Отзывы:

Похожие инструкции для SB 32.24

Бренды по названию

Популярные бренды