Solid State Logic SB 32.24, Руководство пользователя

Страница: 11 / 25

Network I/O Stagebox SB 32.24 User Guide Contents
Connecting a PC:
Network Connection
SSL Network I/O Controller PC application
When the SB 32.24 is used without an SSL console, configuration and control is achieved using the
SSL Network I/O Controller PC application. Download the application from the SSL website using the
link
​
http://www2.solidstatelogic.com/broadcast/network-i-o/downloads
​
.
Double-click the downloaded file to run the installer, then follow the on-screen instructions.
Once the application has installed:
●
Connect the Windows PC to the same subnet as the stagebox. The SSL Network I/O –
Controller application uses TCP/IP to communicate with the stagebox, so if communications
are not working, check Windows Firewall settings.
You may need to change your computer’s TCP/IP settings to match your Dante subnet.
Network configuration should be done before opening the application; subsequent changes to
network settings may require ‘Network I/O – Controller’ to be restarted.
Set your computer to ‘Never Sleep’ to maintain communication.
For additional information see
​
Dante Controller section.
IP Address
Unless shipped as part of a preconfigured system, Stagebox units are shipped with the IP address
set to use DHCP.
If the IP settings need to be changed to a fixed address – to match the network environment in
which the unit is to be installed – this can be achieved using the
​
Dante Controller
​
application.
Remember that your computer’s TCP/IP network settings will also need to be updated to match
those of the stagebox unit.
Page 11 of 25