Network I/O Stagebox SB 32.24 User Guide
Dante Controller
For complete details on Dante Controller software, refer to Audinate’s user guide. The information
below will give you the basics to get started.
Clock sync, device naming and routing are all done within Dante Controller. Dante Controller is the
single point of Dante network management. No network related management is implemented from
SSL software.
Dante utilises the device name for routing. Each device must have a unique name – if a name is
duplicated, it will be appended with a number.
IP Config
Each device requires a DHCP or fixed IP address. The primary and secondary ports must be on
separate networks or VLANs.
Device Info
tab shows the device IP address.
Device
>
Device View...
menu allows setting of DHCP or fixed IP address.
The device will resolve to a link-local address if it is set to DHCP and no DHCP server is present. To
access via link-local, set your PC to DHCP, directly connect to the device’s primary port, and wait for
the link-local addresses to resolve. Link-local addresses use the IP address range 169.254.n.n.
Dante Controller PC GUI
Page 18 of 25
Содержание SB 32.24
Страница 1: ......