INS-TSSHC-3DNPSB-16.7A-1209
2
WARNING
1.Description
The electronic thermostat TSSHC-3DNPSB-
16.7A is designed to control ENERJOY Radiant
Ceiling Panels, and electric resistance heaters,
including units with fans. Set point temperature
is accurately attained and maintained. The elec-
tric current design resistive load range extends
from 1.2A to 16.7A when operating at 120 to
240 Volts as explained in the detail that follows.
This thermostat is not compatible with the
following installations
• electrical current higher than 16.7 A with a
resistive load (4000 W @ 240 VAC, 3475 W @
208 VAC and 2000 W @ 120 VAC);
• electrical current lower than 1.2 A with a
resistive load (300 W @ 240 VAC, 260 W @
208 VAC and 150 W @ 120 VAC);
• inductive load (presence of a contactor or a
relay); and
• central heating system.
Parts supplied :
• one (1) thermostat;
• two (2) mounting screws; and
• two (2) solderless connectors suitable for
copper wires.
Before installing and operating this product,
the owner and/or installer must read, under-
stand and follow these instructions and keep
them handy for future reference. If these in-
structions are not followed, the warranty will
be considered null and void and the manu-
facturer deems no further responsibility for
this product.
Moreover, the following in-
structions must be adhered to in order to
avoid personal injuries or property dam-
ages, serious injuries and potentially fa-
tal electric shocks.
All electric connections
must be made by
a qualified electrician
,
according to
the electrical and building
codes
effective in your region. Do NOT con-
nect this product to a supply source other
than 120 VAC, 208 VAC or 240 VAC, and do
not exceed the load limits specified. Protect
the heating system with the appropriate cir-
cuit breaker or fuse. You must regularly clean
dirt accumulations on the thermostat. Do
NOT use fluid to clean thermostat air vents.
