Before installing the roof boards, ensure that walls are assembled
correctly.
1. Start covering the roof with
roof boards
(POS. 18). Notice that
one side of the
board is beveled
while the other side is squared. You can install it either side
down but keep it uniform throughout.
2. Begin at the front - nail the roof boards at
each point
they meet the beam or wall.
The tongue should be facing the front and sit even with the roof beam ends.
3. Continue to the back.
Follow the ridgeline
to keep the straight line.
4. You may need to cut the last board narrow to make it flush with the beam ends at
the back as well (this depends on the size of the gaps between the planks).
5. Continue to the other side.
NOTE.
If you assemble your shed during prolonged dry weather conditions, it is
recommended to
leave a gap
of about
1
/
16
" between each roof board, thus allowing the
wood to take its normal position in the wet period.
STEP 11 - INSTALL ROOF BOARDS
31
BRIGHTOLN 10 x 10 ft, 1
3
/
8
"
Содержание BRIGHTON
Страница 4: ...BRIGHTON 10 ft x 10 ft 1 3 8 ...
Страница 13: ...13 1 FLOOR JOIST DIAGRAM Position Dimension in Quantity 1 109 3 8 x 2 3 8 x 1 1 2 7 BRIGHTOLN 10 x 10 ft 1 3 8 ...
Страница 40: ...40 STEP 16 FASTEN THE DOOR PANELS WINDOW 3x25mm BRIGHTOLN 10 x 10 ft 1 3 8 4x40mm x4 ...
Страница 42: ...INSIDE OUTSIDE LOCK CYLINDER STEP 17 INSTALL DOOR WINDOW HARDWARE 42 BRIGHTOLN 10 x 10 ft 1 3 8 ...
