Solectek SKYWAY-LM Series, Руководство пользователя, Страница: 31 / 69

31
Figure 6-3: Status Screen
RF Tx Enable – indicate the transmitters are turned ON or OFF.
RF Tx Frequency – Indicates the center frequencies of transmitter of the near and far units.
RF Tx Power – indicates the power output levels of transmitters (same as those in the toolbar).
RF Rx Frequency – Indicates the center frequencies of receiver of the near and far units. These
figures should be the opposite of the RF Tx Frequency.
RF Rx RSSI – indicates the RSSI figures (same as those indicated in the toolbar above).
Demod SNR – indicates the basic system Signal-to-Noise ratio (SNR).
Demod Lock – indicates the basic link condition (same as that in the tool bar).
NOTE: Clicking the “i” button at the bottom right corner opens a help window, which describes
the basic function of each management screen.
6.5 Modem
The Modem screen accesses the configuration and status of the IDU modulator/demodulator system.
Modem Tx (Rx) State – indicates the basic state of the modem function.
Plot – For diagnostics of the modem function, various options are provided to gather information
about the modem operation.