Solectek SkyMate, Руководство оператора

Страница: 48 / 124

Chapter 2: Configuring Your SkyWay Series Unit(s)
34
12. Type “ .w ” to save the changes.
Creating Filter Bridge Ports
1.
The use of the IP Port mode can be done in conjunction with the Source and
Destination Field on the Bridge Screen.
2.
Set the Access Direction to Input, Output, or Both.
3. Set the Bridge Port to for example 2, 256, 256-273.
4.
Set the Access to Allow* or Deny.
Note:
* Allow filters have priority over Deny filters.
5.
Type “ .w ” to save the changes.
IP Filters
There are several options for creating IP Filters. These include:
• Creating Source Filter
• Creating Destination Filter
• Creating Source and Destination Filter
• Creating Filters For UDP/TCP Compare Mode
• Creating Filters For Protocols ICMP, TCP, And UDP
• Creating Filter IP Ports
The following section describe how to create and use these filters.
Creating Source Filter
1. Add IP address of the Source in which you would like to Filter.
2. Add the Source Mask.
3.
Set the Access Direction to Input, Output, or Both. This will filter out traffic
going in, out, or both in and out of the Filter.
4. Set the Filter Access to Allow or Deny. Allow or Deny traffic going through
the filter from the Source IP address.