Solectek SkyMate, Руководство оператора

Страница: 26 / 124

Chapter 2: Configuring Your SkyWay Series Unit(s)
12
Opening a Console session using Hyperterminal
Once your system is connected, open a HyperTerminal™ session on your PC.
In MS-Windows®, choose: Start/Programs/Accessories/Communications/
HyperTerminal/Hypertrm.exe.
In HyperTerminal, create and name a new connection for the attached SkyWay-
Net unit, (for example, SkyWay-Net Base).
Select the applicable COM port (COM1, COM2...).
Change Settings to the following:
• Bits per second = 115200
• Data Bits = 8
• Parity = None
• Stop bits = 1
• Flow Control = None
Under the File Menu, select Properties . Click on the Settings Tab and set
Emulation to VT100 .
Save, exit, and restart your HyperTerminal session.
Press Enter and login (user & password = solectek ).
Remote Access Using Telnet
Telnet is the standard Internet application protocol for remote login. It provides
the encoding rules to link a user's keyboard/display on a client with a command
interpreter on a remote server system.
Telnet uses a single TCP connection, and its normal data stream (“Network
Virtual Terminal” or “NVT” mode) is 7-bit ASCII with escape sequences to
embed control functions.
There is no user console screen for this task on SkyWay. Use the following steps
to access your SkyWay Series wireless network using Telnet.
1.
SkyWay Telnet server should already have a working Ethernet or RF IP
address.
2.
From a remote Telnet client log on to the Telnet server host IP address.
3.
It should connect the Telnet client to the Telnet server.
4.
The SkyWay Telnet server supports a single Telnet session.