Customer Service 1-888-707-1880 Dyaco Canada Inc. 2014
email: [email protected]
5
IMPORTANT
ELECTRICAL INSTRUCTIONS
WARNING!
NEVER
remove any cover without first disconnecting AC power.
If voltage varies by ten percent (10%) or more, the performance of your elliptical may
be affected.
Such conditions are not covered under your warranty.
If you suspect
the voltage is low, contact your local power company or a licensed electrician for
proper testing.
NEVER
expose this elliptical to rain or moisture. This product is
NOT
designed for use
outdoors, near a pool or spa, or in any other high humidity environment. The operating
temperature specification is 40 to 120 degrees Fahrenheit, and humidity is 95%
non-condensing (no water drops forming on surfaces).
GROUNDING INSTRUCTIONS
This product must be grounded.
If the elliptical should malfunction or breakdown,
grounding provides a path of least resistance for electric current, reducing the risk of
electric shock. This product is equipped with a cord having an equipment-grounding
plug. The plug must be plugged into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in
a risk of electric shock. Check with a qualified electrician or serviceman if you are in
doubt as to whether the product is properly grounded. Do not modify the plug
provided with the product if it will not fit the outlet; have a proper outlet installed by a
qualified electrician.
This product is for use on a nominal 110-volt circuit, and has a
grounding plug that looks like the plug illustrated below. A temporary adapter that looks
like the adapter illustrated below may be used to connect this plug to a 2-pole receptacle
as shown below if a properly grounded outlet is not available. The temporary adapter
should be used only until a properly grounded outlet, (shown below) can be installed by a
qualified electrician. The green colored rigid ear-lug, or the like, extending from the
adapter, must be connected to a permanent ground such as a properly grounded outlet
box cover. Whenever the adapter is used, it must be held in place by a metal screw.
