Sole Digital Liftlog XL, Инструкция по установке и эксплуатации

Страница: 39 / 39

© CASWA Pty Ltd – 2012
39 | Page
Appendix D: DATA FILE FORMAT
Data is recorded each time a motion is detected (a contactor closes). Each datum set contains:
1. Date/Time (based on the logger’s internal clock – when a user connects to the logger via
Bluetooth using the FSU software, the time is compared to the time on the laptop and can
be reset)
2. Operator (only used if a logger is bound to an AccessPack)
3. Hook (1 = main, 2 = Aux, 3 = Both hooks)
4. Load from load cell/other input in tenths of a tonne
5. Duration of motion in tenths of a second
6. Motion code – type of motion as shown in the following table.
Motion
Code Motion
0 No move
1 Move Up
2 Move Down
4 Move Fast
8 Move East
16 Move West
32 Move North
64 Move South
128 Move Up Fast
256 Move Aux1 / Aux
512 Move Aux2 / Magnet
1024 Move Aux3/Override
2048 Move Aux1 Off
4096 Move Aux2/Magnet Off
8192 Move Aux3/Override Off
Note: If a combined motion is detected, then the sum of the individual motions is recorded
(e.g. Move Up and Move Fast = 1+4=5).