© CASWA Pty Ltd – 2013
21 | Page
4.5
General Tab
4.5.1
Setting Equipment Name
The only configurable item on the General page is the
Equipment ID. This text can be up to 18 characters long
and it is used to identify the crane in the reporting
system. Whilst any name may be used, it is highly
recommended that the XL be named according to the
registration details provided at the time of purchase.
4.5.2
Upload Data to the Computer
Clicking the <Upload> button brings up a dialog asking where to save the data.
Enter the required file name (usually the crane name or serial number). Make sure the Location
entry is set to “Storage card” and press <Save>.
Progress is indicated on the MAIN screen. Time to download depends on the number of lifts and can
be up to 20 minutes.
4.6
Main and Aux Hoist Configuration
If your Liftlog™XL device has been preconfigured (only available with Abus inputs) or you are using a
HoistNet load signal (which must be calibrated) then you will not need to calibrate the Liftlog™XL.
All other types of Liftlog™XL inputs must be calibrated
. Unless you are connecting the device to a
Konecranes ControlPro (and elect to use the already calibrated ControlPro settings), this process will
require test weights.
The process to configure the Main and Aux hoists is identical, as are the configuration screens.
Click on the Main or Aux tabs to bring up the load settings screens.
