© CASWA Pty Ltd – 2013
13 | Page
3.3.3
Connecting Motion Inputs
Motion input pins (Aux1, Aux2, Aux3, E-W Fast, West, East, N-S Fast, South and North) must be
connected to GND or 0VAC (pins 1, 25, 27, 33) by a set of voltage independent contacts. Where
spare or auxiliary contacts are not available on the MAIN contactors, small relays must be employed.
For example, the DOWN and UP inputs on the Auxiliary hoist would be connected as follows:
LiftlogXL
25, 1, 27, 33: GND
21: Aux UP
20: Aux DOWN
D
U
To existing control
circuitry
0V
Figure 5: Connecting Motion Inputs
