© CASWA Pty Ltd – 2013
23 | Page
The name of the bound HoistNet device will be
shown on the Main/Aux screen. The connection
status will also be shown:
NB: You will need to ensure that the originating
HoistNet device's load signal has been calibrated
correctly.
To unbind a Liftlog™XL from a HoistNet device, or to change the bound device, press the <Bind>
button on the Load screen and then select <Unbind> on the popup box.
4.6.3
Using the LiftlogXL with a ControlPro
If your LiftlogXL device is connected to a Konecranes ControlPro and you want to use the calibration
settings stored on the ControlPro (rather than calibrating with test weights) press the <Control Pro>
button.
A dialog box will appear asking you to confirm this action:
Press <OK> to confirm.
Another dialog box will appear.
