Sole Diesel 68 GTC, Руководство оператора

Страница: 40 / 82

SCO 10 Panel
Solé, S.A. C-243 b, km 2 · 08760 Martorell (Barcelona) ·Tel. +34 93 775 14 00 · www.solediesel.com · info@solediesel.com 37
Operator’s Manual . Marine generator sets
6.2. Operator interface SCO 10
POSITION BUTTON DESCRIPTION
1
START button. Works in MAN mode only. Press this button to initiate the start
sequence of the engine.
2
STOP button. Works in MAN mode only. Press this button to initiate the stop
sequence of the genset. Repeated pressing or holding the button for more
than 2s will cancel current phase of stop sequence (like ramping the power
down or cooling) and next phase will continue.
3
FAULT RESET button. Use this button to acknowledge alarms and deactivate
the horn output. Inactive alarms will disappear immediately and status of
active alarms will be changed to "confirmed" so they will disappear as soon
as their reasons dismiss.
4
HORN RESET button. Use this button to deactivate the horn output without
acknowledging the alarms.
5
MODE LEFT button. Use this button to change the mode. The button works
only if the main screen with the indicator of currently selected mode is
displayed.
Note:
This button will not work if the controller mode is forced by one of the binary
inputs Remote OFF, Remote MAN, Remote AUT.
6
MODE RIGHT button. Use this button to change the mode. The button works
only if the main screen with the indicator of currently selected mode is
displayed.
Note:
inputs Remote OFF, Remote MAN, Remote AUT.