Sole Diesel 68 GTC, Руководство оператора

Страница: 26 / 82

Systems and scheduled
maintenance
Solé, S.A. C-243 b, km 2 · 08760 Martorell (Barcelona) ·Tel. +34 93 775 14 00 · www.solediesel.com · info@solediesel.com 23
Operator’s Manual . Marine generator sets
5.4. Lubrication System
Circuit description
The lubrication circuit is forced by the trochoid gear pump, and it is composed of the following
elements.
PIECE ELEMENT
1 Main gallery
2
Oil pump
3 Oil strainer
4 Oil pan
5 Oil filter
6 Pressure relief valve
* Oil circuit capacity (L)
8 GTC / 10 GTAC / 7 GSC / 8 GSAC 4,1
11 GTC / 14 GTAC / 10 GSC / 12 GSAC 4,2
17 GTC / 20 GTAC / 14 GSC / 17 GSAC
6,0
*Including filter change (0,5l)
Oil specifications
Use oil with 15W40 viscosity (this is an all-season oil for temperatures
ranging between -15ºC and +40ºC) or select the most suitable oil viscosity for the
atmospheric temperatures on which the genset is going to be operated. On the other
hand, use oil quality no less than ACEA E5/E3 or API CH-4/SJ. Other genset oils may
affect warranty coverage, cause internal genset components to seize and/or
shorten genset life.
Never mix different types of genset oil. This may adversely affect the lubricating properties of
the genset oil.
Maintenance task. Oil filter change
The oil filter is located under inlet manifold of the engine.
Remove oil filter with a belt wrench. When fitting a fresh oil filter,
smear a small quantity of oil into the annular seal and firmly genset
and check oil is not leaking.