Sole Diesel 68 GTC, Руководство оператора

Страница: 36 / 82

Systems and scheduled
maintenance
Solé, S.A. C-243 b, km 2 · 08760 Martorell (Barcelona) ·Tel. +34 93 775 14 00 · www.solediesel.com · info@solediesel.com 33
Operator’s Manual . Marine generator sets
Genset Model
Battery capacity (Ah)
12 V 24 V
8 GTC / 10 GTAC / 7 GSC / 8 GSAC 60 PD
11 GTC / 14 GTAC / 10 GSC / 12 GSAC / 17
GTC / 20 GTAC / 14 GSC / 17 GSAC
80 PD
Circuit protection
AC Breaker interrupts the genset output in the event of an overload or short circuit. It is located in
front panel as is showed in the section 10.
Genset model Current (A)
8 GTC / 10 GTAC 10
7 GSC / 8 GSAC 25
11 GTC / 14 GTAC 16
Maintenance task. Incandescent glow plug inspection
1. Loosen nuts, and then remove connection plate
and glow plug.
2. If the glow plug glows red when the positive (+)
wire is connected to the portion A with the
portion B grounded, the plug can be used.
Rated voltage - Current 12 V 9,7 – 10,5 A
Maintenance task. Starter motor inspection
1. Check if there is any impurity in pinion teeth.
2. Make sure that the pinion shaft turns freely when turned
in the direction of driving (clockwise) and it is locked when
turned in the opposite direction. If not, replace the
overrunning clutch.
Maintenance Task. Alternator Belt Tension Inspection
Push the belt inward with thumb pressure exerted midway between the
pulleys, as shown, to check the belt tension (deflection). If the tension is
incorrect, loosen the adjusting bracket bolt and mounting bolt, and move the
alternator in or out.
Item Assembly Standard
V-belt deflection 10 – 12 mm
12